Back to Top

Hi, Guest!
  • PUMP
  • Iwaki Hi-Techno Pump IX-C series

Iwaki Hi-Techno Pump IX-C Series

Update Terakhir
27 / 02 / 2020
Min. Pembelian
1 Unit


PT. Surrama Tridaya Mandiri adalah perusahaan yang bergerak dalam bidang usaha importir , distributor alat-alat instrument : flowmeter, gas detector, control valve, safety valve, pressure reducing valve, dll

Detail Iwaki Hi-Techno Pump IX-C Series

Diaphragm Pump.

Features of IX-C series

High turn down ratio
Full motor control varies the discharge and suction speeds independently to provide a full turndown ratio of 750:1.
Precise chemical dosing
The valve design maintains precise dosing over the flow range while the motor regulates discharge and suction speeds, combining to achieve high accuracy (+/-1%) in a cost-effective, mechanically-driven diaphragm pump.
Efficient and eco-friendly
Helical gears and spring assistance reduce power consumption by 70% compared to conventional spring-back designs.
Smooth dosing with low impact
Flow control is done by discharge speed adjustment only (suction speed remains fixed). This provides the smoothest injection at any flow rate and reduces inertial forces, pulsations, and loads on piping
High compression pump head design
A fixed (full) stoke length maintains maximum compression resulting in fast priming and eliminating air lock at any flow or rated pressure.
Viscous liquid transfer
Standard IX series is capable of pumping liquid viscosities of up to 1000mP·a. Contact us for higher viscosity applications.
World standard compliant
The IX pumps are compatible worldwide, featuring multi-voltage operation (100 – 240VAC). Compliant to both UL and CE standards.
Drive and control units are each sealed separately to IP65 standards.
Safety design
Standard to all models is a diaphragm rupture detector, protecting users and the environment. Also, a detector for abnormal operation protects the pipework in case of an accidental high discharge pressure caused by clogging or improper operation. A drain hole also ensures safe operation even when the diaphragm is damaged.

Specifications of pump (50/60Hz)

Max. discharge capacity range 0.013 – 2.5 / 0.013 – 2.5 L/min
Max. discharge pressure range 0.4 t- 1.0 MPa
Main materials PVDF, SUS316
Power consumption 62 W
Liquid temperature range PVDF type: 0 t- 50˚C, SUS316 type: 0 – 80˚C
Power voltage 100 to 240 VAC 50/60Hz

Specifications of controller

Operation mode MAN (Manual) C060: 80 mL/h – 60 L/h
C150: 200 mL/h – 150 L/h
EXT Analogue control 4 – 20, 0 – 20, 20 – 4, 20 – 0 mA
Pulse control C060: 0.00625 mL/PLS – 120 mL/PLS
C150: 0.01560 mL/PLS – 300 mL/PLS
Batch control C060: 6.25 mL/PLS – 120 L/PLS
C150: 15.6 mL/PLS – 300 L/PLS
Interval batch control Time: 0 – 9 day, 0 – 23 H, 1 – 59 min
C060: 6.25 mL – 120 L
C150: 15.6 mL – 300 L
Input STOP / Pre-STOP / AUX / Interlock No-voltage contact or open collector
Profibus Communication protocol: Profibus-DP
International standard: Compliant to EN50170 (IEC61158)
Analogue 0 to 20 mA DC (Internal resistance is 200 Ω.)
Pulse No-voltage contact or open collector (MAX pulse frequency is 100 Hz.)
Output Alarm 1 No-voltage contact (Mechanical relay) 250 VAC 3A (Resistive load)
Selectable: STOP, Pre-stop, Interlock, Leak Detection and Motor Overload.
Alarm 2 No-voltage contact (PhotoMOS relay) AC250V 3A (Registive load)
Selectable: STOP, Pre-STOP, Interlock, Leak Detection and Motor Overload.
Power supply 12 VDC 30 mA or below
Tampilkan Lebih Banyak
Kontak Kami