Back to Top

1
Hi, Guest!

Bray Rack And Pinion Pneumatic Actuator Flow-Tek Series 92/93

Update Terakhir
:
04 / 09 / 2020
Min. Pembelian
:
1 Unit

Harga

CALL
PT. Surrama Tridaya Mandiri adalah perusahaan yang bergerak dalam bidang usaha importir , distributor alat-alat instrument : flowmeter, gas detector, control valve, safety valve, pressure reducing valve, dll

Detail Bray Rack And Pinion Pneumatic Actuator Flow-Tek Series 92/93

Bray Rack and Pinion Pneumatic Actuator  Flow-Tek Series 92/93

Output Torque
Up to 44,130 in-lb (4,986 Nm)
Temperature Range
Standard: -4°F to 200°F (-20°C to 93°C) Low: -40°F to 176°F (-40°C to 80°C) High: 0°F to 300°F (-18°C to 149°C) Extreme High: 0°F to 350°F (-18°C to 176°C) 4 hours at 482°F (250°C)
Pressure Ratings




Features & Benefits:

Bray proudly offers the Flow-Tek Series 92/93 rack & pinion, opposed-piston pneumatic actuator, designed to incorporate innovative, high performance features into a compact, rugged, and reliable modular product line. These space-saving, modular units are self-contained with integral internal porting that reduces the cost of easily damaged external tubing. Units are suitable for both on/off and throttling applications.

Low Friction

With a low coefficient of friction, the Series 92/93 provides superior high-cycle, long lasting service. All piston cylinder walls are honed to a very fine finish and piston guides, piston rings, and output shaft bearings are permanently lubricated and manufactured from acetal material1.

 

Spring Return

Flow-Tek’s spring return models employ a unique cartridge system. The spring cartridges offer safety, simplicity, and reduced space requirements. The actuator can be easily disassembled and assembled without cumbersome equipment or any danger to the installer. Converting from double acting to spring return actuation is simply a matter of removing the end caps and adding the unique spring cartridges. The housing length of the spring return model is the same as the double acting model, except size 48 units.

 

Actuator/Accessory Mounting

All Series 92/93 actuators comply with ISO 5211 standards for mounting of actuators to valves. A double square bore (star) in the ouput shaft is standard. Actuators meet NAMUR standards (VDI/VDE 3845) for accessory mounting.

 

Integral Travel Stops

Adjusting screws that contact a cam assembly on the output shaft precisely limit travel of the actuator to specific degrees of rotation. The travel stops permit bi-directional adjustment of actuator movement in both the open and closed positions.

Stainless Steel Trim

The Series 92/93 is offered with stainless steel body, end caps, and hardware for superior internal and external corrosion resistance. These units are ideal for chemical, pulp & paper, sanitary, food & beverage, marine, mining and pharmaceutical applications.

Note: Optional trims exist for low, high, and extreme high temperature services.
Max Pressure: 140psig (10 Bar)
Tampilkan Lebih Banyak
Kontak Kami