The RMG 530-P flow control valve works with electronically controlled flow or pressure control. As the valve sleeve and extension sleeve only need to be removed from the body, RMG 530-P the central valve is easily maintained. The valves are controlled by the inlet pipe dia.DN 200 and upwards are for axial flow and therefore a safety shut-off valve can not be used. The proven design of the valve sleeve is used to provide full pressure compensation for inlet and outlet. The valve sealing in the cone 5 valve ensures that the system is resistant to bubbles. The electrical actuator attaches the valve sleeve by spinning the worm screw, which then spins the sleeve with the gear wheel on the valve sleeve. The movement of the valve sleeve pushes the valve sleeve back and forth, as the gear wheel sleeve often operates in a threaded outer ring. Regulator Gas
